Solid and drilled hot platen which high efficienty heating and can also make the veneer flat and avoid crack and splits in the drying process.
Grooved line on the hot platen surface which help the steam emission more easier to accelerate the drying and avoid the veneer get damp.
Simultaneous closing device make the dryer closed at the same time to guarantee all the veneer drying time is same to achieved the same moisture.
Mitsubishi PLC control system and Schneider electric parts
Taiwan hydraulic system: lower power consumption less noise.
Total pressure | 120T |
Direction of feeding board | Transverse |
Layers | 15 |
Layer spacing | 70mm |
Quantity of hot platen | 16pcs |
Hot press plate size | 2700x1370x42mm(Groove type 20*20mm) |
Cylinde | 4x120mmx1050mm |
Stroke | 1050mm |
Simultaneously closing system | 2 groups |
Power | 11+7.5kw、380V、50HZ、3Phase |
Upper and bottom beam | 500mm |
Middle dimension | 3450*1370*3200mm |
Weight | About 25 Tons |
Working methods | Full automatic |
Hydraulic system | Taiwan Brand |
Electric system | Mitsubishi PLC, operating screen |
Home About Us Products Project Knowledge Blog Contact Us Privacy Policy